Cutting Tips - Blaupunkt GT1000 Manual Del Usario

• •
OPERATION
Check before starting the device!
!
DANGER!
Risk of injury!
The device may only be put into operation if there are no defects. If a part is defective it must be replaced before the device is used
again.
!
WARNING!
Risk of injury!
Before starting work check the area and remove all objects which may be kicked up by the unit.
Check to make sure the device is in safe operating condition:
• Check to make sure there are no visible defects.
• Check to make sure all device components are correctly mounted.
Proper Position
• Hold the unit
• With the left hand on the front handle, and the right hand at approximately hip level on the operating handle.
• Balanced in a comfortable way.
Attaching the extension cable
• P. 4, item 4
Plug the unit plug into the connector of the extension cable.
Feed the extension cable through the strain relief mechanism (3) as shown.
Switching on and o
• Switching on: Press down the On/Off switch (1).
• Switching off: Release the On/Off switch (1) again.

CUTTING TIPS