Troubleshooting - BaBylissMEN SH500E Guia De Inicio Rapido

LOCKING
The appliance has a Locking function that prevents the appliance from being switched on and
the buttons activated accidentally, for example during travel.
1
To activate the Locking function
Press and hold down the Parking button
The Locking function is activated.
Note: This may take approximately ten seconds.
The Parking symbol lights up.
The 3 combs will rise progressively.
The appliance head is unclipped and descends, bringing the combs with it.
The Lock symbol fl ashes and the LED display screen turns off .
2
To deactivate the Locking function
Press and hold down the Parking button until the display screen shows a 3 to 1 countdown;
the Lock symbol fl ashes and the cutting length and remaining use time are displayed.
The Locking function has now been deactivated. You can now use the appliance
again.
Note
• Locking is automatically deactivated when the appliance is placed in its stand.
• Locking can also be deactivated using the
CHANGING THE CUTTING HEADS
In order to maintain the performance of your product, we recommend that you change the
cutting heads every year.
A kit of three cutting heads and the necessary tools is available for sale in shops or from the
BaByliss Customer Service department under BaByliss product code SH050E.
until the Lock symbol fl ashes.
button.
18

TROUBLESHOOTING

Problem Possible cause
The LED screen display shows The adapter used is not suitable
"HI" or "LO". to charge the appliance.
The LED screen display shows A malfunction has occurred
"ER". while charging the appliance.
The LED display screen shows The appliance has not been
the fl ashing Cleaning symbol cleaned after 15 minutes of
continuous use.
when you press the
button.
The appliance head does not The automatic head-raising
unclip after having pressed the mechanism of the appliance
activated by the Cleaning
Cleaning button or Parking
button or Parking button
button .
is blocked by hair and
impurities.
The appliance head lifts up
The Cleaning
during use and the motor
button has been pressed
stops.
accidentally during use.
Solution
Check that you are using the adapter supplied with the
appliance to charge the appliance.
Remove the appliance from its stand for an hour.
If the problem continues, contact the BaByliss after-sales
service.
Press the Cleaning button and clean the appliance as
described in the chapter on cleaning.
You can lift the head manually using 2 fi ngers to press
simultaneously on the notches on the front and back of
the appliance.
Then press the Cleaning button
appliance head under running water as described in the
chapter on cleaning, or the Parking button to store your
appliance correctly.
or Parking Press the Cleaning or Parking
appliance returns to the desired position.
Note: if the appliance head has become unclipped, clip it
in again.
19
and place the
button so that the