MAC Audio Z 4100 Modo De Empleo Y Garantia página 11

Max. output power (1 kHz sinus burst 2:8, B+=14.4V)
Nominal output power (DIN 45 342, B+=14.4V)
Max. output power (1 kHz sinus burst 2:8, B+=14.4V)
Nominal output power (DIN 45 342, B+=14.4V)
Loudspeaker impedance (stereo)
Frequency response
Total harmonic content (DIN 45 403)
Stereo separation (IEC 581 )
Weighted noise distance (IEC A)
Input sensitivity LOW LEVEL INPUT
Input impedance LOW LEVEL INPUT
Low-pass filter
High-pass filter
Bass boost
Supply
Fuse
Sizes (W x H x D)
Weight
SUBJECT TO TECHNICAL CHANGE
2. FEATURES
• Complementary push-pull final stage
• Automatic switching on/off via car radio
• Infinitely adjustable high-pass filter 40 – 500 Hz
• Infinitely adjustable low-pass filter 50 – 250 Hz
• Infinitely variable bass equalisation
• Adjustable input sensitivity
Bridgeable 4-/3-/2-channel mode
•
Tri-mode
•
• Electronic protective circuit against short circuiting, DC offset and excess temperature
• Mute switch for suppressing switch-on crackle interference
• Capsulated loudspeaker and power-supply screw terminals
• Low-level outputs (cinch jacks) for connecting additional amplifiers (channel 1 and 2 only)
• Status indicator (green LED) and overload indicator (red LED)
GB
Z 4200
Stereo / Bridged
4 x 220 W / 2 x 750 W
4 x 110 W / 2 x 285 W
4 x 280 W
4 x 140 W
2 – 8 Ohm
5 – 50 000 Hz (-3 dB)
< 0.05% (1 kHz)
> 60 dB (1 kHz)
> 100 dB
200 mV – 5 V
25kOhm
50 – 250 Hz, 12 dB per octave
40 – 500 Hz, 12 dB per octave
0...12 dB at 45 Hz
+ 12V (9 – 15 V), minus to ground
1 x 80 A Maxifuse
435 x 54 x 293 mm
5.9 kg
11
on 4 Ohm
on 4 Ohm
on 2 Ohm
on 2 Ohm