Safety Precautions - König CMP-REMRACK10 Manual Del Usuario

Adjusting the settings of the LCD display
Push the "Mode" button for 2 seconds and the display will enter the
settings mode. Adjust the "setting values" by pressing the "Set"
button. The settings will shift as shown below:
! T1 ! F1 ! T2 ! F2 ! T1 ! F1 etc.
This product can monitor 2 sets of temperature and fan speeds. If
only one temperature and fan are monitored, the other set will
display "- -" in the LCD display.
The range of the temperature setting is 40 C to 80 C. Variation unit is
5 C per step. The range of the fan speed is 1000 to 5000 rpm, with
each step 1000 rpm.
1 minute after adjusting the settings, the display will switch back to
normal display mode automatically or you can exit by pushing the
"Mode" button for 2 seconds.

SAFETY PRECAUTIONS

To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician if service is required. Disconnect
the product from mains and other equipment if a problem should
occur. Do not expose the product to water of moisture.
WARRANTY
No guarantee or liability can be accepted for any changes and
modifications of the product or damage caused due to incorrect use
of this product.
GENERAL
Designs and specifications are subject to change without a notice.