Bluetooth Pairing - neptor ET-KB300BF-WH Manual Del Usuario

4. Power Up/Standby Mode/Charging the Battery
Hold the Power Button for 3 seconds to turn on or off.
Note: This keyboard automatically enters standby mode after 3 minutes of inactivity to save battery.
Simply press any key to wake up and resume operation.
Note: This keyboard automatically reconnects to previously paired Bluetooth device when powered
on and the previously paired Bluetooth device is within range.
Note: It takes about 2 hours to fully charge the battery. The charging indicator lights up while
charging battery and turns off when battery is fully charged. One full charge provides 30 hours of
continuous use, which translates into several weeks of regular usage.

5. Bluetooth Pairing

1. On the Bluetooth enabled devices (such as iPad and iPhone)
go to SETTINGS > GENERAL > and enable BLUETOOTH.
2. Hold the Reset Button for 3 seconds to enter Bluetooth pairing mode.
3. You should see "KB300BFwould like to pair ..." Using this keyboard, enter the PIN displayed
on the screen and hit Enter/Return key to complete pairing.
Note: If you are pairing with other type of smartphones or tablets, please consult that device's user
manual for specific Bluetooth pairing instructions.