Important Safeguards - Alpina SF-5062 Instrucciones De Utilizacion

Dear Customer,
Thank you for choosing this quality ALPINA home appliance. Your Alpina appliance comes with a 2 year
warranty and will provide years of service if looked after properly. The ALPINA name brings you Quality,
Reliability and Dependability. We hope you will continue to make ALPINA your first choice in home
appliances.
When using electrical appliances, basic safety precautions should be followed:
1. Read all instructions carefully.
2. Make sure the power supply corresponds to one on the rating label.
3. To avoid electrical shock, do not immerse electrical parts in water or other liquid.
4. Do not allow children to operate or play with the appliance.
5. Unplug from outlet when not in use, or before putting on/taking off parts.
6. Do not use with damaged electrical cord or plug.
7. If damaged or malfunction occurs, refer to an authorized service center only.
8. Do not place on or near hot surfaces.
9. Never pull the appliance by the power cord.
10. Do not use the appliance for other than intended household use.
Save this instruction carefully
1. Please hold the water tank firmly with both hands when carrying full tank of water.
2. Do not touch the water in the flume when the unit is working.
3. Never operate the unit without water in the tank. Never add any additive to the water.
4. When the water tank is empty, the red indicator lights turn on and the power will shut off, it indicates
the user to refill water.
5. Never let your fingers, hands or other parts of your body get too near to the humidifier.
6. Temperature of clean water<40℃ (suggested using of pure water).
7. Fitting work condition: 5-40℃, relative humidity<80%RH.
8. Humidifier should be unplugged when not in use for a long period of time, Do not use outdoor.
Instructions for use
Ultrasonic technology is a very mature technology and widely used in various domain. Water is atomized
by ultrasonic sound waves and propelled in the air evenly by a small fan. These ultrasonic pulses are silent
and produce visible mist.
Filling the water reservoir
1. The filling aperture must not be opened during use. When refilling the reservoir, turn the cleaner off
and allow it to cool for five minutes. It is recommended to unplug the cleaner.
2. Drain any water that might be left over from previous uses. This is to help ensure that you do not
overfill the reservoir.
a. Hold the tank handle and lift the water tank from the unit. Figure 1
b. Turn the water tank up-side down, unscrew the tank cap by turning it anti -clockwise and set aside.
Figure 2
c. Fill the water tank with clean, cool, tap water. Figure 3
d. Replace the tank cap by firmly turning clockwise. Figure 4
e. Turn the water tank upright; hold the tank handle to place the water tank back to the unit balanced.
Please set the two arrowheads in a line. Figure 5
1

IMPORTANT SAFEGUARDS

2 3 4 5
ENGLISH