Before Calling After-Sales Service - NIBELS COSM185D Manual De Uso

7 BEFORE CALLING AFTER-SALES SERVICE

Errors
Your fridge will warn you if the temperatures for the cooler is at improper levels or if a
problem occurs with the appliance. Warning codes are displayed in the cooler indicator.
ERROR TYPE
"Failure" Warning
[Sr]
[Sr] – Set
Refrigerator
value Blink
compartment is not cold
on cooler set
enough
value screen
[Sr] – Set
value blink Refrigerator
compartment too cold
on cooler set
value screen
"Low voltage" Warning
"[--]"
If your fridge is not working properly, it may
be a minor problem, therefore check the
following, before calling an electrician to
save time and money.
Your fridge is not operating
Check if:
• There is power
• The plug is correctly connected to the
socket
• The plug or mains fuse has blown
• The socket is faulty. Examine this by
plugging your fridge into a working
socket.
What to do if your appliance performs
poorly;
Check that;
• You have not overloaded the appliance ,
• The fridge temperature set to 2.
MEANING
There is/are some
part(s) out of order or
there is a failure in the
cooling process.
The product is plugged
for the first time or
a long-time power
interruption for 1 hour.
This warning especially
appears if there has
been a power failure
for a long period or
when the refrigerator is
operated for the first
time. Ideal temperature
for the refrigerator
compartment is +4
If you see this warning,
your foods are at risk of
spoiling.
The food will start to
freeze because the
temperature is too cold.
This is seen when the
power supply becomes
lower than 170 V.
WHY
Check the door is open or not and check
if the product working 1 hour. If the door
is not open and the product had worked
1 hour, call service for assistance as
soon as possible.
1. Set the refrigerator temperature
to colder values or set the Super
Cooling mode until the compartment
reaches normal temperature.
2. Open the door as little as possible
C. until the fault clears.
o
1. Check if the Super Cooling mode is
2. Decrease the refrigerator
This not a failure. This prevents any
damage to the compressor. This warning
will clear after the voltage reaches the
required level.
• The door is closed perfectly ,
• There is no dust on the condenser ,
• There is enough place at the rear and
side walls.
Your fridge is operating noisily
Cracking (ice cracking) noise occurs:
• During automatic defrosting.
• When the appliance is cooled
or warmed (due to expansion of
appliance material).
Motor noise: Indicates the compressor
is operating normally. The compressor
may cause more noise for a short time
when it is first activated.
Bubbling noise and splash: Due to
the flow of the refrigerant in the tubes of
the system.
EN - 56
WHAT TO DO
switched on.
temperature values.