Belkin PureFilter PF30 Manual Del Usuario página 10

Hookup and Installation
Step 4
Connect High-Current Audio Filter (8-Second Delay)
The HiCurrent socket is specifically designed to filter out AC line noise
while delivering maximum current to power-hungry amplifiers and other
high-current audio components.
Note: The HiCurrent socket is equipped with an eight-second delay. This
allows your high-current amplifiers to turn on last and turn off
first, avoiding that annoying and potentially damaging "thump"
from getting to your speakers.
A. Attach Belkin power cable labels to each component's power
cable before you plug the cable into the HiCurrent socket on the
Power Console.
B. Connect your high-current device into the "HiCurrent Filter".
Examples of the most common high-current components are
listed below:
1. A mplifiers
2. P owered Sub-Woofers
3. E lectrostatic Speakers
Note: You can connect any type of high-current audio component
into any of the high-current sockets. You are not limited to the
components listed above.
9