Setting The Date And Time - AVE CRONOTC1B Instrucciones Para El Uso

User manual
In order to start the chronothermostat after it has been installed, proceed as follows:
1. Set the date and time.
2. Select the Summer/Winter operation.
3. Select the operating mode.

Setting the date and time

To set the current time and date, proceed as follows:
1. Enter the programming menu main page. The operating mode currently used will
be interrupted temporarily.
Choose the time setting function.
2. Modify the hour setting by means of the ▲ and ▼ buttons,then go to the
minute setting by means of the ► button.
3. Modify the minute setting by means of the ▲ and ▼ buttons, then go to the day
setting by means of the ► button.
4. Modify the day setting by means of the ▲ button, then press ENTER to go
back to the main page of the programming menu.
5. Press ENTER again to exit the programming menu.
The chronothermostat operating mode previously interrupted will be resumed.
29
ENGLISH