Operation Of Ft Heevice; Overview About The Parts; Quick Start Guide; Demount And Mount Protection Cap - Walimex Pro Newcomer 100 Manual De Instrucciones

4. Operation of the device

4.1 Overview about the parts

3
2
1
5
6
7
1 Photo Cell (hidden)*
2 Ventilation Slots
3 Unlocking Lever
4 Reflector
5 Main Switch O/I (OFF/ON)
6 Umbrella Holder
7 Tripod shot
* The Photo Cell is below the red,
transparent cover on the top side
of the device

4.2 Quick start guide

NOTE
The detailed instruction for the following
operations can be found in the respective
chapters in this instruction manual.
Keep the sequences of the following opera-
tion steps when using the device for the
first time to avoid damages on the device.
34
WARNING
Please note the safety notes in the
respective chapters throughout
4
operation.
1. Demount protection cap
2. Mount reflector
3. Insert modeling lamp
4. Mount reflex umbrella (optional)
5. Connect to power supply
6. Switch on device
7. Adjust, switch off the modelling light
8. Adjust flash output
9. Adjust audio button
10. Prepare flash trigger
11. Mount on tripod (optional)
12. Radio remote triggering
5. Demount and mount
protection cap
WARNING
Posterior danger of bursting of flash tube
Make sure not to touch the flash tube with
bare hands accidentally.
Openings for reflector or protection cap