- Scan the QR Code on the bottom of the camera.
EN
- Enter the verification code located on the bottom of the camera.
- Enter the correct time zone and DST information and tap "Finish" to finish setup.
Bottom of the Camera
3. To Change the Default Password
The camera uses the verification code as the default camera password. After
adding the camera, you are required to change the device password to ensure your
video security. The password is used for the Image Encryption. If you turn on the
Image Encryption, you are required to input your password when you live view or
play back the camera.
- Go to the camera settings screen to change the default password.
3