Forney 52760 El Manual Del Propietario página 4

5V USB PORT
The USB outlet provides up to 1.1A at 5V DC.
1. Turn the USB switch to the USB position, and the
USB indicator LED will be on;
2. Plug the device into the USB port;
POWER SUPPLY VIA 12V OUTLET
• Max. output is 15A (180W).
• The outlet has overload protection with automatic
reset.
• The internal battery in the jump starter can be
emergency charged from the vehicle's 12V outlet.
However, it cannot be charged fully in this way. Use
the AC charger in the usual case.
2
3
1
4 5 6 7 8 9
WWW.FORNEYIND.COM
3. Reverse these steps when finished using the USB
port;
4. Recharge the jump starter as soon as possible after
using the USB port.
1. Open the cover over the outlet.
2. Connect the 12V product to the outlet.
3. If the output socket of jump starter is overloaded
by output current (15A max), the circuit will be cut
off automatically. Reduce the amp draw of electrical
equipment on the socket and the circuit will be
restored automatically in a few minutes.
4. Recharge the jump starter as soon as possible after
using the output socket
1. 12V outlet
2. Emergency lighting
3. Charging connection
4. Indicator light for correct/incorrect connection
5. Power switch for USB
6. 5V USB connection
7. Power switch
8. Indicator lights for charge level
9. Battery control button/switch for emergency light
4