Default Values; Terms Of Guarantee - AQUA FORTE DosaTech Manual Del Usuario

• Weight: 0.7 kg
• Dimensions l x w x h: 80 x 90 x 215 mm
• Consumption: 5 Watt
• Rotation: 30 rpm
• Voltage: 230V
• Frequency: 50/60 Hz
DosaTech replacement set
Article number: 5056596 dosing pump replacement set
(consisting of 2 dosing hoses, the suction spout and the injection spout)
Replacement pump head
Article number: 5056597
Available as an option:
3901086 tapping saddle Ø 50 mm x3/4" & PVC socket nipple (see Drawing 3, I+J)
3901087 tapping saddle Ø 63 mm x3/4" & PVC socket nipple (see Drawing 3, I+J)
8
IMPORTANT INFORMATION
First action when the DosaTech is switched on (Drawing 1)
If the pump head has been stopped for a longer period of time, there is a risk that it
will stick. In this case, you will hear a clicking sound. This can be prevented by activating
the silicones in advance by pulling the hose to and fro twice.
ATTENTION:
Never use an additional timer.
After a power cut the operating hours on the timer (normal operating status) and 00:00
will blink on the display. The clock (tSet) needs to be reset. The set dosing values are
stored permanently in the memory, however. If the clock is not reset, the timer will
automatically continue to count from 00:00 hours, and the device will still carry out
dosing at the set times.
Check the device regularly for any power cuts that may have occurred.
Always test the water yourself, the system will not do this for you.

Default values

(start values set by the factory)
• dP is set to 000 sec. for every hour
Dosing pump
• Make sure that the hoses of the dosing pumps are filled with liquid, and that they
have no air in them.
• 1 sec = 0.5 cc
based on a viscosity (liquid thickness) equal to water
• Max. dosage time: 120 sec. per hour

Terms of guarantee

You have made an excellent choice in selecting this product. The device has been
assembled carefully and in compliance with all applicable safety regulations. For
reasons of quality, the supplier has only made use of high-quality materials, and
provides a guarantee for the device covering material and manufacturing faults for a
period of 2 years from the date of purchase.
Claims under the guarantee can only be considered if the product is returned post-paid
together with a valid purchase receipt. Repairs under the guarantee may only be
carried out by the supplier.
Guarantee claims that are caused by errors in the installation or in the operation of
the device will not be considered. Defects originating from poor maintenance are
also excluded from the guarantee. The supplier will in no way whatsoever be held
responsible for any damage caused by the incorrect operation of the product. The
supplier will not be liable for any consequential damage caused by the breakdown
of the device. Complaints regarding transportation damage will only be considered if
the damage was established or confirmed upon delivery by the carrier or the postal
authorities. A claim can only be made against the carrier or postal authorities if this
has been done.