Initial Start - „Quick Weighing; Start Measurement - HMM Diagnostics SmartLab W Manual Del Usuario

In order to guarantee a correct measurement you should calibrate
the scale always after any location change. Just tip on the scale
and wait until it shows "0.0" on the scale.
Initial Start - „quick weighing"
Use the smartLAB
move, stand still and stand on both legs. Tip on the scale shortly with your
foot. The scale will turn on and show possible user profiles (P1 untill P8).
Choose a user profile number by stepping on the scale as soon as the user
number you wish is shown. The scale starts measuring immediately, a beep
tells you the end of the measurement and finally shows your body weight
on the display. Now you can step off the scale. The scale will deactivate
automatically after several seconds.
Start Measuring
Select Measuring Unit
With batteries correctly installed, press the "UNIT" button on the back of the
scale to select the measurement unit. The default measurement unit is "kg".
You may press "UNIT" button to choose among kilogram and pound.
Daily Measurement
Thanks to the SENSE ON patent technology, the scale will automatically turn
on when you step on the platform.
scale W Bathroom Scale to measure your weight. Do not
®
27