Using the Remote Control (continued)
2
Using the remote control
□
The operation of the remote control buttons works the
same as the buttons on the front panel of the
fireplace/heater. Review the Operation section for more
information on the functionality of these buttons.
NOTE: The remote control cannot lock/unlock the
flame and heating function, and it cannot switch
between Fahrenheit and Celsius
Care and Maintenance
WARNING: Always disconnect from the power supply before
cleaning the heater. First turn off the main power. Then remove
the electrical plug from the wall outlet.
WARNING: Do not use this fireplace insert if any part of it has
been under water. Immediately call a qualified service technician
to inspect the firebox and replace any part of the electrical system
which has been under water.
The blower motor and flame motor are pre-lubricated for a durable using time and need no further lubrication or maintenance. To remove any
accumulation of dust or fluff the soft brush attachment of a vacuum cleaner should occasionally be used to clean the outlet grille of the fan
heater.
□
Use a soft, clean cloth that will not scratch the surface when dusting.
□
Use a clean soft cloth dampened with warm water to clean the fireplace surface. DO NOT use household or abrasive cleaners, as these
products may damage the surface.
□
When cleaning the glass viewing screen use a non-abrasive damp cloth with liquid cleaner or soft soap if necessary; DO NOT use
cleaning powders or any other substance with abrasives since these substances will scratch glass.
□
Under no circumstances should this product be operated with a broken or chipped glass panel.
□
Do not strike or slam the glass.
□
In the event that your appliance is stained or otherwise damaged during use, we recommend that you call a professional to repair your
furniture.
□
When not in use please unplug the cord from the outlet to prevent any damage or accidental plug of the cord.
.
8
Heater Control
Heater Up
Heater Down
Main Power
Flames Control
Timer Function