Healthy Dehumidification Operation
During Healthy Dehumidification Operation
o If you select the dehumidification mode on the OPERATION MODE SELECTION
In this case, however, the setting temperature is not displayed on the remote
controller and you are not able to control the room temperature either.
o During the healthy dehumidification function, the airflow volume is automatically set
Air Circulation Operation
This operation circulates the air without cooling or heating. It can be
activated by pressing the OPERATION MODE SELECTION BUTTON.
Once the air circulation is activated you can select the air speed by
pressing the INDOOR FAN SPEED SELECTOR BUTTON.
Auto Operation
In this operation mode, the system is automatically operated by the
electronic controls.
- You can set the desired temperature between 64°F and 86°F for Auto
PLASMA Purification Operation (Optional)
Plasma purification can be started by pressing the PLASMA BUTTON on the remote controller.
Repressing it will deactivate the operation.
NOTE
This feature can be used in any operation mode and any fan speed can be used while
plasma filter is functioning.
BUTTON, the product starts to run the dehumidification function. It automatically
sets the room temperature and airflow volume to the best condition for
dehumidification, based on the sensed current room temperature.
according to the optimization algorithm responding to the current room temperature status,
so that the room condition is kept healthy and comfortable even in the very humid season.
NOTE
: During this opertion, 'Cooling' lamp lights up.
(Standard Libero Type)
Operation mode.
NOTE
This function properly operates when you use the remote controller
matching each model.
Plasma filter is a technology developed by LG to get rid of microscopic
contaminants in the intake air by generating a plasma of high charge electrons.
This plasma kills and destroys the contaminants completely to provide clean and
hygienic air.
Operating Instructions
Owner's Manual 13