Programming Examples - Siemens 5TC1 Manual Del Usario

GB
Prog Zufall Astro
C
Uhrzeit
Datum
The time, day, running direction, Astro function and random function data are now stored
in the program memory.
The shutter control timer 'Komfort' is ready for programming of the next switching time
(see step 3: Selecting the memory location for the storage of switching times).
C

6.2 Programming examples

Example 1:
The blind/shutter is to go up every day when it is gets light and down when it gets dark.
Programming:
Switching time 1: UP, 04:00, Mo - So, Astro activated
Switching time 2: DOWN, 22:00, Mo - So, Astro activated
48
Programming the switching times
9. Setting the Astro function
Use the
the Astro function for the programmed switching
Mo
Di
time.
Mi
Do
flashing:
Fr
Sa
lit up:
So
Confirm the setting by by depressing the
briefly.
10. Quitting the programming mode
When all switching times are stored in the pro-
gram memory, quit the programming mode by
pressing the
The timer displays the actual time.
or key to activate or deactivate
Astro function off
Astro function on
key for at least 3 seconds.
Set
key
Set