Installing - Rollei Lion Rock MH-7 Mark II Manual De Operación

Installing

Installing
1. The handle can be mounted on both sides
of the video head. If the handle locking
knob is loosen you can adjust the angle of
the handle just according to your needs.
2. This video head can be mounted on
tripods, guide rails or monopods by using
the 3/8" thread on the bottom. When you
loose the base locking button you can pan
the video head. Therefore, we recommend
to fix the video head firmly onto the tripod
and secure it by using the locking screws of
the tripod. Then the head cannot acci-
dently be screwed off the tripod when the
panning function is used.
3. The platform locking knob will be used for
tighten or loosen the quick release plate to
adjust its position. Turn the locking knob
clockwise to tight the quick release plate
and counterclockwise to loose it.
4. The handle adjustment knob helps to at-
tach and fix the handle to the video head.
Furthermore the angle of the handle can
be changed. If this knob is loosened a bit
the angle can be adjusted to your perso-
nal needs and then tighten again in the
correct position. To loose this knob turn it
counterclockwise and clockwise to tighten
it again.
Tighten
Loosen
Loosen
Tighten
Tighten
Loosen
Tighten
Loosen
1
2
3
4
9