Remote Control Functions - Classic Flame 52EB497GRA Manual De Instrucciones Adjunto

This builder box can be operated by the wall mounted control box or remote.
CONTROL BOX FUNCTIONS
Slide the main power switch (labeled ON/OFF) on the control box to the
"ON" position ( see figure 1). If this switch is "OFF", then the other controls
and remote control will not work.
- STANDBY
Pushing this button will switch off all the functions of the Builder Box. Pressing
it again will resume all the functions to their previous settings.
FLAME
Pushing this button will switch the flame between four settings:
white, blue, blue and white, and off.
DOWNLIGHT
Pushing this button will switch the downlight between 10 settings: white, pink,
red and green, red, green, green-blue, light blue, blue, purple and OFF.
UPLIGHT
Pushing this button will switch the uplight between 10 settings: white, pink,
red and green, red, green, green-blue, light blue, blue, purple and OFF.
AUTO
When the Auto button is pressed, the downlight and uplight colors will smoothly
fade in and out through a programmed sequence. In this mode it is still possible
to select any individual flame setting by pushing FLAME button.

REMOTE CONTROL FUNCTIONS

Note: The ON/ OFF switch on the wall controls must be in the "ON" position
for the remote control to work.
- STANDBY
Pushing this button will switch off all the functions of the Builder Box. Pressing
it again will resume all the functions to their previous settings.
FLAME
Pushing this button will switch the flame between four settings:
white, blue, blue and white, and off.
DOWNLIGHT
Pushing this button will switch the downlight between 10 settings: white, pink,
red and green, red, green, green-blue, light blue, blue, purple and OFF.
UPLIGHT
Pushing this button will switch the uplight between 10 settings: white, pink,
red and green, red, green, green-blue, light blue, blue, purple and OFF.
AUTO
When the Auto button is pressed, the downlight and uplight colors will smoothly
fade in and out through a programmed sequence. In this mode it is still possible
to select any individual flame setting by pushing FLAME button.
OPERATION
E-3
Figure1: Control Box
OFF
FLAME
DOWNLIGHT
UPLIGHT
AUTO
Figure 2: Remote Control
FLAME
DOWNLIGHT
UPLIGHT
AUTO