Kneading Accessory - HAEGER Multi Cook FP-60B.001A Instrucciones De Uso

4. Put the lid on the bowl, and then turn the lid clockwise to fix it. When the lid
is assembled correctly, you hear a click.
5. Connect the power plug to the power supply.
6. Turn the knob to the desired speed setting to switch the appliance.
7. After use, turn the speed selector to 0, and then unplug the appliance.
Tips
 When you chop onions, turn the speed selector to P a few times to prevent
the onions from becoming too finely chopped.
 If food sticks to the blade or to the inside of the bowl;
1. Switch off the appliance.
2. Remove the lid from the bowl.
3. Remove the ingredients from the blade or from the wall of the bowl
with a spatula.

Kneading accessory

Before you start, make sure that you assemble according to fig.2.
You can use the kneading accessory to knead dough for bread and pizzas. You
may need to adjust the amount of liquid in your dough recipe depending on
the humidity and temperature condition of your kitchen.
Note
 Do not use the kneading accessory to blend cake batters. Use the blade
unit for this job.
 Always put the kneading accessory in the bowl before you add the
ingredients.
 Turn the control knob to the kneading pre-set (speed 1).
Emulsifying disc
Before you start, make sure that you assemble according to fig.3.
The emulsifying disk can be used to whip egg whites, cream and to make
mayonnaise. Do not use the emulsifying disc to prepare cake mixtures with
butter or margarine or to knead dough.
Citrus press
Before you start, make sure that you assemble according to fig.4.
1. Put the driving shaft onto the motor unit. Turn the bowl clockwise to fix it on
the motor unit. When the bowl is fixed correctly, you can hear a click.
2. Put the sieve on the driving shaft in the bowl.
3. Put the cone on the sieve.
Instructions for use
English
5