Using your FireBoard
Using your FireBoard thermometer is simple! Just turn it on (hold power button for 2 seconds), and connect
your temperature probes.
The FireBoard will automatically re-connect to any wireless networks which have been previously
configured and are still available. Temperatures are also always available over Bluetooth, provided it is in
range (approx 100').
A new session will automatically start once temperature data is being pushed. Sessions will automatically close after
30 minutes of inactivity. You can easily modify the session name and add notes via the Sessions view of the app.
Monitor your temperatures online at
Use of the Select Button and the LCD Display
Your FireBoard will automatically display the temperatures of any connected probes. The display will rotate through
active channels every 4 seconds. By pushing the Select Button, you can quickly advance the screen to the next
channel. The screen will then hold that channel for 15 seconds, and then will continue rotating automatically.
Setting up Alerts
Multiple alerts can be configured for each channel via the Dashboard view of the app. Just touch the channel
you wish to configure. Multiple phone numbers & emails can be added for notifications. The alerts have the
following parameters:
Max/Min Temp
Email, Text, & In-App
Notifications
Custom Start/End
Times
Running on Battery and USB
The device is designed to run 24/7 with USB power, or battery power for approx 24 hours on a full charge.
A power and charging cord is included, or any standard type Micro USB charging cable can be used. Charge
time will vary based on battery conditions but can take up to 4-6 hours to completely charge.
Accessories Available Online
Please visit
fireboard.com
clips, and Probe extension cables.
fireboard.io
Thresholds for alert condition (one or
both can be set).
Toggle your notification preference(s).
Define when alerts are active (alerts
will fire only inside of this time win-
dow). By default, this window is all
day.
to purchase FireBoard accessories including: Ambient Probes, Food Probes, Grill
®
or on your mobile app.
Minutes Buffer
Minutes Repeat
Don't forget to add your Email, Text and In-App
Notifications preferences in your account settings.
Alerts will not fire unless conditions
exist longer than this value. Default
value is 0.
Specify how often alerts will repeat
once alert conditions are triggered.
EN
5