Identification Tag; Trimpot Functions - Pegasus GRT7-TH4 R2 Manual De Instalación, Operación Y Mantenimiento

www.pegasustech.com.br

7 IDENTIFICATION TAG

The above example shows the main characteristics described in the nameplate/ID tag that needs to be checked before installation.
NOTE
1. The ID tag is affixed on the backside of the regulator, and to the Installation Guide.

8 TRIMPOT FUNCTIONS

Vad: Voltage adjustments. Turning clockwise increases voltage;
Stb: Stability adjustments. Turning clockwise slows down stability response
U/F: U/F limiter. Turning clockwise increases the U/F range, counterclockwise it diminishes;
Drp: Droop adjustments. Turning clockwise increases the reactive compensation range;
NOTE
* A potentiometer for fine adjustments of voltage (5kΩ/3W) can be connected on terminals.
* The U/F and Stb trimpots were preseted and sealed, but if adjustments are required, They can be
performed according to the procedures described in this manual.
18 l Automatic Voltage Regulator – GRT7-TH4 R2
Figure 7.1: Identification tag