BUILDING THE GATE
1.
Place the top and bottom vinyl frame rails
parallel to each other with the flat legs of
the aluminum stiffeners facing up, and the
baluster holes facing each other (Fig. 1).
Place the left- and right-side vinyl frame
rails parallel to each other with the flat legs
of the aluminum stiffeners facing up. Align
with the routs to accept the flat legs of the
aluminum stiffeners in the top and bottom
frame rails (Fig. 2).
2.
Insert the left-side frame rail into the
bottom frame rail (Fig. 3).
Insert the right-side frame rail into the
bottom frame rail (Fig. 4).
(Fig. 1)
(Fig. 2)
3.
Insert a baluster into each hole in the
bottom frame rail (Fig. 5).
Insert the right-side frame rail into the top
frame rail (Fig. 6).
Working toward the left-side frame rail,
insert each baluster into the corresponding
hole in the top frame rail (Fig. 7).
(Fig. 3)
(Fig. 4)
(Fig. 5)
(Fig. 6)
(Fig. 6)
3