Walker Clarity Extra W1100 Guia Del Usuario página 10

Warning: To prevent electrical shock,
always unplug the telephone line cord and
AC adapter from the wall before removing
the cord from the telephone. Never leave
the cord connected to the wall if it is not
also connected to the telephone.
• Hold the Walker Clarity so that the holes
on the mounting bracket line up with the
raised mounting pins on the modular wall
jack. Once the holes are lined up, push the
phone in towards the wall jack and then
slide the phone downward until it is se-
curely seated on the wall jack.
• Plug one end of the handset cord (coiled)
into the bottom of the handset.
10
INSTALLATION
• Plug the other end of the handset cord
into the jack located on the lower left edge
of the Walker Clarity.
• Place the handset in the cradle of the
Walker Clarity. The special tabs will hold it
in place.
Hook
Switch
Tabs
W-1100 Clarity Extra