Operating; Panel Description - Hiltron security PROTEC3 Manual Del Usario

PROTEC3 - User's manual
4

Operating

4.1 Front panel description
1
Key switch
1
Allows to enable / disable the system. If there's
an electronic key or another command system ,
this switch has always to be turned on the "ON"
position.
Zone 24h status control LED
2
on
off
Zone 1 status control LED
3
on
off
Zone 2 status control LED
4
on
off
Fuse service output F2 (1A)
5
Fuse sirens output F1 (3A)
6
28
11
opened zone
closed zone
opened zone
closed zone
opened zone
closed zone
2
10 9
"ALARM MEMORY" LEDs
7
8
On system disabled, if the LED
flashes, these LEDs indicate which zone
caused the alarm.
Yellow LED "ALARM"
9
on
blinking
Green LED "EXIT"
10
on
blinking
off
11 Red LED "POWER"
on
off
security
3 4
8
7
during the entering time
or in alarm condition
ALARM MEMORY
(see 7 e 8 to identify the
zone that caused the
alarm)
system disabled
during the exiting time
system enabled
presence of main supply
absence of main supply
5
7 6
"ALLARME"