RealFlame C1510LP Manual Del Usario página 2

NATURAL GAS CONVERSION KIT
!
WARNING
• The qualified service agency is responsible for the proper installation of this kit. The
installation is not proper and complete until the operations of the converted appliance
is checked as specified in the manufacturer's instructions supplied with this kit.
• This conversion kit shall be installed by a qualified service agency in accordance with
Real Flame's instructions and all applicable codes and requirements of the authority
having jurisdiction.
• If the information in these instructions is not followed exactly, a fire, explosion or
production of carbon monoxide may result causing property damage, personal injury
or loss of life.
!
This conversion kit is for changing a Liquefied Petroleum (LP) fire table into a Natural Gas
NOTE
fire table.
1
Natural Gas Hose and Quick Disconnect
2
NG Orifice Spud
3
Primary Air Mixer Sleeve
1
2
PARTS LIST 00023105G
3.9mm
4
Conversion Plaque
5
Cable Kit
4
50,000 BTU/Hr. (14.65 kW)
3
1
5
C1510LP
#3.9mm