Basic principles
TO START
Before using your « Adrenalin » camera for the first time :
Insert a microSD, microSDHC™ or microSDXC™ card into the slot of the card with the label
facing the front. We recommend using the card of Class 10 or higher speed.
Charge the battery. The lithium-ion battery comes partially charged.
To charge it, connect the USB cable that is provided for this purpose to the camera and the
other end of the cable to a power supply such as a computer or a USB charger.
To maximise your battery life, operate a full charge before the first use.
To charge the battery :
1. Connect the camera to a
computer or a source of 1A
USB power supply by using 1
micro USB / USB cable.
2. The red battery indicator
light stays on when the
battery is charging.
3. The battery indicator light
turns off when the battery is
fully charged.
USB
EN
19