Cleaning And Maintenance; Conformity Declaration; Technical Information - Vermop EQUIPEMOVE Traducción Del Manual De Instrucciones Original

Cleaning and maintenance

1. Buckets and boxes: Rinse out after use to avoid deposits of chemicals and dirt residue.
2. Cleaning trolley and holders: Wipe down all metal and plastic parts weekly with a damp cloth, so
that dirt does not dry on.
3. Stainless steel parts should be cleaned regularly, regardless of the degree of soiling, using an
acidic sanitary cleaner and a green cleaning pad and dried off using a soft, absorbent cloth.
4. Despite the built-in thread guard, the wheels frequently pick up hairs, threads or similar soiling
during use. These should be removed to prevent malfunction. In order to maintain smooth
operation, the running surface should be checked for embedded foreign bodies. Any such items
should be removed.
Disposal
After withdrawal from service, the appliance and accessories are to be disposed of correctly in
accordance with national regulations. VERMOP can be of assistance to you in this matter.
During maintenance or repair work, all contaminated objects which cannot be satisfactorily
cleaned are to be disposed of. Such items must be placed in impermeable bags and disposed of in
accordance with the national regulations applying to the disposal of waste of this kind.

Technical information

Working voltage: 24 V = max. 300W
Service weight: max. 200 kg
Incline: max. 2%
Speed: max. 5 km/h forwards
max. 2 km/h reverse
12

Conformity declaration

We
VERMOP Salmon GmbH
D­82205 Gilching
hereby declare that the product described here, due to its design and construction and as
distributed by us, complies with the relevant basic safety and health requirements of the
European Community Directives.
This declaration loses its validity when alterations which have not been approved by us are made
to the products.
Product: Cleaning trolley
Name: Equipemove
Type: Cleaning trolley with electrical motor
Relevant Guidelines
The product complies with the requirements of the German products and products safety law.
Harmonised norms used
The model Equipmove has been tested by us in accordance with the following norms:
Low voltage guidelines 73/23/EWG (+93/68/EWG)
I with the norms: EN 60 335-1, EN 60 335-2-29, EN 60 335-2-72.
EMV guidelines in accordance with 89/336/EWG (+91/263/EWG, 92/31/EWG, 93/68/EWG)
with the norms EN 61 000-6-1, EN 61 000-6-2, EN 61 000-6-3.
Internal measures have assured that the products always comply with the requirements of the
current European Community Directives and the norms applied.
WEEE ­ Reg. ­ Nr. DE 72469700
Dirk Salmon
Managing Director
VERMOP Salmon GmbH
D
EN
F
I
ES
DK
PL
HU
NL
13