Creating Macros - Titanwolf 303338/20180703SZ232 Manual De Usuario

5.2.3 LED
You can customise the LED lighting as desired. Effect type, colour and speed (speed
of the currently enabled effect) can be selected depending on the desired appea-
rance. For this purpose, double click a colour to enable the corresponding colour.

5.3 Creating macros

Macros are recordings of specific key sequences, which can be run by pressing a
single mouse button depending on the configuration. This can, for example, be
keystrokes or mouse commands. To define a macro, click the "Macro Manager"
button in the left section of the software.
To start recording a new macro, first click on "New". Then, define a name by double
clicking on the macro. The recording can be started using the "Start recording"
button and stopped using the "Stop recording" button. Additional options are
available on the right side of the Macro Manager for recording the steps. You can
customise other settings by right clicking on the "Key Press Sequence" field. This,
for example, can be a delay of 50 milliseconds between the desired keystrokes. The
option of editing the recorded steps subsequently is also available.
Note: Please remember that the "Z" and "Y" keys are reversed. To configure, use the
letter other than the one desired to obtain the right result. Special characters and
the numpad cannot be used as a macro.
18
English