Charging The Battery - EZ Smart GC18-1 Guía De Usuario

When the blower's performance starts to degrade, it is time to recharge the battery as follows:
1
Lift up rubber flap to expose the DC In
jack. Insert the AC Adapter's plug into the
DC In Jack.
2
Insert the AC Adapter into an AC Outlet
having 120V, 60Hz; the Indicator on the
AC Adapter will be red while it is charging.
When the indicator turns green, the blower
is fully charged. Make sure to disconnect
the AC Adapter at this point.
Important: Please charge the blower fully before first use.

Charging the Battery

5