Understanding The Display - BGS technic 63401 Manual Del Usuario

Built-in Buzzer:
1. When you press a button. the buzzer will sound a beep if this press is effective.
2. The buzzer will sound several short beeps about one minute before the meter turns off automatically
and will sound a long beep before the meter turns off automatically.

UNDERSTANDING THE DISPLAY

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 Reading display area
TRIG +
16
TRIG -
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
2- or 4-stroke engine
Data Hold is enabled
Cylinder number display which shows the presently selected engine cylinder
number
The battery is low and must be replaced immediately
Continuity test is selected
Diode test is selected
USB serial port communication has been turned on
Autorange mode is active
Relative mode is active
Auto power off is enabled
Dwell angle measurement is selected
Negative sign
DC
AC
Positive (+) trigger is selected
Negative (-) trigger is selected
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed