Worx WX655 Traducción De Las Instrucciones Originales página 7

ACCESSORIES
Cyclone dust box
60 grit velcro sanding paper
120 grit velcro sanding paper
180 grit velcro sanding paper
Dust extraction adapter
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Waste electrical products must not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice.
Finishing Sander
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
1
instruction book carefully.
10
INTENDED USE:
The machine is intended for dry sanding of wood,
10
plastic, metal and filler material as well as painted
surfaces.
10
Machines with electronic control are also suitable for
polishing.
1
ASSEMBLY AND OPERATION
ASSEMBLY
Fitting & Removing the
Sanding Paper
Attaching the Cyclone
Dust Box
CAUTION: To prevent
the possibility of sanding
dust or foreign body being
thrown into your face or eyes,
never attempt to use your
sander without the dust box
properly installed.
Emptying the Cyclone
Dust Box
For more efficient operation,
empty dusts box every
5-10mins.
Using the dust extraction
adapter
OPERATION
On/Off Switch
Orbital sanding
Selecting the right grade
of sandpaper
NOTE: Different grades
of sanding sheet can be
purchased from the store
where the sander was
purchased, or www.worx.
com. Available grades range
from coarse to fine.
Changing the Outer/Inner Pad
Action
See Fig. A1, A2
See Fig. B
See Fig. C1, C2
See Fig. D
See Fig. E
See Fig. F
See Fig. G1, G2,
G3, G4
Figure
7
EN