CICSA Zeta ANEXO TEC+ ZT Manual De Funcionamiento página 16

TEC+ English - User guide
2 - Press or
day 1 (1= Monday, 2 = Tuesday, etc.) will flash.
1 1 1 1 1 1 1 1 1 1 1 1 1
3 - Chose the programme you want for this day
with o . Save by pressing
1 1 1 1 1 1 1 1 1
4 - The programme assigned to the second day
of the week (Tuesday) will flash. Repeat the
procedure described previously (in point 3) for
each day of the week.
1 1 1 1 1 1 1 1 1 1 1
5 - Once you have chosen a programme for each
day, confirm your selection by pressing
days of the week will successively scroll on
display with the programmes that you set for
them (P1, P2, P3, CONF or ECO).
To exit the Programming mode, press
VIEWING THE PROGRAMMES THAT YOU HAVE
SELECTED
From Auto, Comfort,
protection mode, press
Press twice, the programme for each
day of the week (Comfort, Eco, P1, P2 or
P3) will scroll on display in front of you.
To exit the programme viewing mode, press
twice.
Towel radiator models ZT, ZX, PUKITA, TUBON, DIJON, CUADRO, KARNAK, VERONA and ELFIE
. The programme set for
.
1 2
.The
twice.
Eco or Frost
for 5 seconds.
Pol. Ind. Logipark. 28823 Coslada (Madrid) ESPAÑA
Tel: 00 34 91 485 08 67 • Fax: 00 34 91 485 08 86
MANUAL AND TEMPORARY EXEMPTION FROM
A RUNNING PROGRAMME
This function allows you to change the setting
temperature temporarily until the next scheduled
change in temperature or the transition to 0:00.
Example:
1 - The device is in
is Eco 15,5°C.
2 - By pressing
temporarily the desired temperature up to 18°C
for example.
NOTE: The cursor corresponding to the operating
mode, i.e Eco mode in our example, is blinking
during the duration of the temporary derogation.
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
3 - This change will be automatically cancelled at
the next change of programme or transition to
0:00.
3
Paseo de las Flores, 21 - Nave 2
e-mail: cicsa@e-cicsa.com
www.e-cicsa.com
mode, the running programme
3
or , you can change