Lenmar PowerPort Wave6600 Manual De Instrucciones

Model: PPW66
PowerPort™ Wave6600 - Portable Battery & Charger
PLEASE READ THIS INFORMATION THOROUGHLY BEFORE USING THIS PRODUCT. IT CONTAINS IMPORTANT
OPERATING INSTRUCTIONS FOR YOUR UNIT.
Owner's manual
Thank you for purchasing the PowerPort Wave6600, Portable Battery and Charger. Take the compact,
lightweight PowerPort Wave6600 with you wherever you go and have a handy charger or rescue battery that
works anywhere!
The PowerPort Wave6600 charges your tablet, PDA, cell phone, MP3 player, game system, or almost any
device that can be charged via a USB cable connection.
You have a maximum of 3.1A between this unit's dual USB ports.
Port 1 o ers 1.0A max
Port 2 o ers 2.1A max, making it tablet compatible.
Included in the package you have purchased:
PowerPort Wave6600, USB Charging Cable, & User Manual
Charging your PowerPort Wave6600
You can charge the PowerPort Wave6600 with the included Micro-USB to
USB cable. Just plug the Micro-USB cable into the Micro-USB input port
(labeled "in" on unit), and the other end into your computer's USB port, a
USB wall plug style adapter, or a USB DC car adapter.
The LED status indicators show the current charging status of the
PowerPort Wave6600. The LED's will blink and become steady as it
charges, ascending from the bottom to the top. Once the 4th LED has
become steady, the charging process has completed.
Capacity Level / Charge Button
With the built-in "Capacity Level / Charge Button" button, you have the option of checking the remaining
capacity left in the PowerPort Wave6600. Checking remaining capacity is as easy as pushing the button while
the PowerPort Wave6600 is not connected to any device.
One LED indicates 20-40% power remaining.
Two LED's indicate 40-60% power remaining.
Three LED's indicate 60-80% power remaining.
Four LED's indicate 80-100% power remaining.
When you're ready to charge your device, plug it in and push the "Capacity Level / Charge Button to start the
charging. Once the button has been pushed, it will charge your connected device. If within 30 seconds it
senses no device is connected, it will shut down automatically.
Connecting the PowerPort Wave6600
to your Device.
Attach your device using its USB charging/sync cable
(not included) to the PowerPort Wave6600. Once
attached via its USB cable, push the "Capacity Level /
Charge Button" button once, turning it "ON". Depending
on the device, it will now either power or charge it.
Port 1 Port 2
USB
Capacity Level / Charge Button
PowerPort ™ Wave6600
Features:
（1） LED Indicator
（2） Capacity Level / Charge Button
（3） USB Output Port 1 (1.0A)
（4） USB Output port 2 (2.1A) tablet compatible.
（5） Micro USB input Port
（6） Micro USB cable
Caution:
Do not overcharge the PowerPort Wave6600, as it will shorten its life span.
Disconnect the PowerPort Wave6600 as soon as it is practical after the charge is complete. When not in use,
unplug the PowerPort Wave6600 from all cables and devices. Do not drop.
Recycle or dispose of the PowerPort Wave6600 properly. If disposed of in re or short circuited, the PowerPort
may leak or explode, causing personal injury.
Note:
The PowerPort Wave6600 must be charged prior to rst use and may become warm during charging and use.
Specifications
Cell type: Lithium-Polymer Battery
Input: DC 5V500mA
Port 1 Output: DC 5V 1.0A
Port 2 Output: DC 5V 2.1A
Capacity: 6600mAh
Dimensions: 112 x 88 x16mm
Weight: 189g
Limited 1 Year Warranty
Lenmar product is warranted to be free of defective parts and workmanship for stated period from the original date of purchase. Warranties are not transferable.
The warranty excludes damage resulting from accident, misuse, modi cation, delay or loss of use, damage to equipment or by normal wear and tear.
ALL WARRANTY REQUESTS MUST BE SUBMITTED AT: www.lenmar.com/warranty
INCLUDE A COPY OF ORIGINAL PROOF OF PURCHASE WITH RETURNED BATTERY OR THE CLAIM WILL BE DENIED.
Copy of Proof of Purchase from an authorized Lenmar Dealer must include the following:
- The company where the product was purchased
- The date of purchase
- The model number of the product purchased
- Send back the product freight prepaid (we recommend insuring the package as Lenmar will not be responsible for shipments lost or damaged in transit).
Include $10.00 payable to Lenmar Battery Solutions for processing fee for ship to address in the Continental United States.
Include $15.00 for ship to address in Hawaii, Alaska or Canada.
Use preprinted Lenmar shipping label or clearly print your RA Number on the outside of the shipping carton.
Proposition 65 Notice (California)
The following statement is required in the state of California pursuant to the settlement of an action brought by the Mateel Environmental Justice Foundation against
multiple electronics and appliance manufacturers
• WARNING: Handling the cord on this product will expose you to lead, a chemical known to the state of California to cause birth defects or
other reproductive harm. Wash hands after handling.
For additional questions, comments or to explore other Lenmar battery solutions, visit our web site at: www.lenmar.com or call 800/424-2703 from 9AM – 5PM PST.
Lithium-Polymer battery must be
recycled or disposed of properly.
311-286-33-0607 r1 y1
3
5
2
1
Send to:
Lenmar Battery Solutions
Attn: Return Department
4035 Via Pescador
Camarillo, CA 93012-5050
4
6