Installing The Decorative Cover; Installing The Battery - PROGRESS LIGHTNING AirPro P250006 Manual De Instalación

Before starting
CAUTION:
disconnect the power by turning off the circuit
breaker or removing the fuse at fuse box. Turning
power off using the fan switch is not sufficient to
prevent electric shock.
1. Remove the 1 of 3 screws from the posts of
the mounting ring and keep it for future use.
Loosen the other 2 screws. (Do not remove)
2. Place the key holes in the decorative cover
over the two screws previously loosened from
the mounting ring. Turn the decorative cover
until the decorative cover locks in place at the
narrow section of the key holes. (Fig. 13)
Securely tighten the two mounting screws
3.
previously loosened and the one previously
removed.
Fit the decorative cap onto the decorative
4.
cover and secure with the nut provided.
5. Re-Install the bottom guard back to the fan
guard.
7.

Installing the Decorative Cover

installation,
Mounting Ring
Decorative Cover
Screws
Decorativ Cap
Nut
Bottom Guard
Screws
Figure 13

Installing the battery

Install 12V battery (included), to prevent damage
to transmitter, remove the battery if not used for
long periods. (Fig. 14)
Figure 14