Grease Nipples; Tensioning Belt On Travel Drive - TYROLIT Hydrostress FSE1240 Serie Instrucciones De Servicio

TYROLIT Hydrostress AG
7 Maintenance

7.1 Grease nipples

7.2 Tensioning belt on travel drive

Page 18
When?
Daily
Weekly
Every 50 hours of operation
Annually or every 100 operating hours
Position of grease nipples
1 Motor: 2 items
2 Feed adjuster control rods: 4 items
3 Wheel drive shaft bearing: 2 items
► Remove the appropriate number of belt links until the belt is tensioned.
What?
► Perform a visual check for damage.
► Check belt and chain tension and adjust as
necessary.
► Lubricate grease nipples.
► Arrange a major service by TYROLIT
Hydrostress AG or an authorised
representative.
4 Cylinder eye: 1 item
5 Blade drive shaft bearing: 2 items
Floor Saw FSE1240