Personal Attack - Cooper 706r Manual Del Usuario

EN
Tilt Switch - Silent
To change from PA to Tilt Switch - Silent mode press and hold the Control button for seven
seconds. After five seconds the 706r gives a double beep and the Activity LED flashes.
After a further two seconds the 706r gives another double beep to signal the change in
mode.
Note: While the 706r is in either of the Tilt Switch modes the Activity LED flashes once
every 10 seconds.
To Change Back to PA Mode
To change back to PA mode press and hold the Control button again for five seconds. The
buzzer gives a single beep to signal the change in mode.
Operation

Personal Attack

Press the two orange side buttons together. The transmitter does not signal if you press
only one button. Note the black button fitted below the left-hand orange button. This is a
safety lock to prevent false activations. Slide the black button upwards to lock the orange
button.
11