Blower Installation - Broan Best P12D Manual De Instrucciones

BEST BY BROAN OUTDOOR
RANGE HOOD SYSTEM
MODEL 441
(10" Rd. Wall Cap)
MODEL 418
(10" Rd.
Adjustable Elbow)
TRANSITION
SV03428
(supplied with hood)
MODEL P12D
BLOWER
(Interior Blower)
MODEL 437
(High Capacity
Roof Cap)
MODEL 421
(10" Rd. Vertical
In-Line Damper)
MODEL 410
(10" Rd. Duct - 2 ft. sections)
AEWPD SERIES
SOFFIT CHIMNEY
(Required only for
soffit-less
installations)
OUTDOOR
SERIES
HOOD
(Canopy with
blower controls
& lighting.
Required for all
installations.)
(WPD281
shown)
ABWPD SERIES
BACKSPLASH
(Stainless Steel wall
covering with shelves.
Optional)

BLOWER INSTALLATION

Installation into Best by Broan Outdoor
Range Hoods.
VERTICAL DISCHARGE
THREADED
STUD
BARREL NUT
1. Assemble barrel nut (packed loose with blower) approxi-
mately 1/2 way onto threaded stud on top inside of hood.
2. Lift blower to top inside of hood as shown. Slide blower
back to engage blower tab with slot in hood top and slot in
blower with barrel nut.
3. Tighten barrel nut to secure blower to hood. Use a long, flat-
blade screwdriver.
4. Plug blower power cord into receptacle inside of hood.
MODEL P12D
Page 2
BOTTOM
INSIDE VIEW
SLOT
OF HOOD
BLOWER TAB
BLOWER
POWER
CORD