Attach A Sheet Of Paper - iskn THE SLATE 2+ Guía De Uso

SLIP ON AND CALIBRATE THE RING

ATTACH A SHEET OF PAPER

or
Ensure The Slate Orientation
1. Squeeze the adapter into a heart shape to insert it into
The Ring.
2. Take your favorite pencil, slide down The Ring to about
3 - 4cm (1,2") (1,6") from the tip.
3. Press and hold one of the two buttons of the Slate.
Front Led is solid white.
4. Hold the nib of the pencil at the center of The Slate.
Front LED is solid pink.
Release the button. Repeat this operation each time you
change your drawing tool.
Good to know
The Ring provided in this box is size S.
It can be used on all writing tools with a diameter of
up to 7.3mm (0,3"). For larger diameters, size M is
available (sold separately).
List of compatible tools : iskn.co/tools
Remove a sheet of paper from the sketchbook and place
it on The Slate surface using the markings.
1. Fasten the Clips to the edge of The Slate.
2. Simply press on the back of the Clips to remove them.
Good to know
With the Slate, you can write on a single sheet of
paper or a notebook (up to 7 mm / 0.3''). Be careful
not to change the position of the sheet during use.All
types of paper are compatible with The Slate. Sheet
dimensions: 148 mm x 210 mm (5.8'' x 8.3'').
EN
FR
DE
ES
5