Installation On Wall; In The Event Of Problems - Rowenta SO6010 Manual Del Usuario

SO6010-20-30-40.qxd:NC00009767 23/09/08 15:23 Page 9

7- INSTALLATION ON WALL

GB
The unit is made for wall use.
It must be positioned correctly and in a vertical orientation (switch located in the upper zone; see fig 5)
The instructions for bathroom installation and minimum distances described in fig. 5 must be respected.
You must use the provided wall brackets (K) to attach the unit to the wall.
Wall Attachment: see fig. 6a.
• Attach the wall bracket with appropriate screws and plugs following the direction of the arrow.
• Insert the upper wall-bracket hook (L) in the unit's transport handle (G), and clip the lower wall-bracket hook (M) onto the unit.
Taking Down the Unit: see fig.6b.
• Maintain a solid grip on the unit and push down upon the lower tongue of the wall bracket.
• Pull the unit out from the bottom.
• Lift the unit up and remove it from the upper hook.
8- CLEANING
• Your appliance must be unplugged before proceeding with any cleaning work.
• You can clean it with a slightly damp cloth.
• IMPORTANT: Never use abrasive products which might damage the appearance of your appliance.
• We recommend that you clean the air inlet and outlet grills at least once a year; (clean with a vacuum cleaner if necessary).
9- STORAGE
• It is extremely important that the unit be allowed to cool down before it is put away.
• The power cord can be rewound for storage (see fig.3).
• When you are not using your appliance, store it in a dry place.

10- IN THE EVENT OF PROBLEMS

• Never dismantle your appliance yourself. A poorly repaired appliance may be dangerous for the user.
• Before contacting one of our Approved Service Centres (see enclosed list), ensure that:
– the appliance is set to normal operating mode;
– the air inlet and outlet grills are totally clear.
11 - ENVIRONMENT PROTECTION FIRST!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.