Bosch ART 35 Manual Original página 10

OBJ_BUCH-1800-004.book Page 10 Tuesday, August 29, 2017 8:22 AM
10 | English
 The user is responsible for accidents
or hazards occurring to other people
or their property.
 Wait until the cutting head has com-
pletely stopped before touching it.
The head continues to rotate after the
trimmer is switched off, the cutting
system can cause injury/damage.

Work only in daylight or in good artifi-
cial light.

Avoid operating the trimmer in bad
weather conditions especially when
there is a risk of lightning.

Operating the trimmer in wet grass
decreases the efficiency of perfor-
mance.

Switch off when transporting the
trimmer to and from the area to be
worked on.
 Switch on the trimmer with hands
and feet well away from the rotating
line.
 Caution – do not touch rotating
cutting line.
 Do not put hands or feet near the cut-
ting system.
 Never fit metal cutting elements to
this trimmer.
 Inspect and maintain the trimmer
regularly.
 Have the trimmer repaired only by an
authorized customer service agent.
 Always ensure that the ventilation
slots are kept clear of debris.
 Take care against injury from the
blade fitted for cutting the nylon line
length. After feeding line always re-
turn the trimmer to its horizontal op-
erating position before switching on.
F 016 L81 763 | (29.8.17)
 Switch off and remove the plug from
the socket:
– whenever you leave the machine
unattended for any period
– before replacing the cutting line
– if the cable is tangled,
– before cleaning or working on the
trimmer
 After use, disconnect the machine
from the mains and check for dam-
age.
 Store the machine in a secure, dry
place out of the reach of children. Do
not place other objects on top of the
machine.
 Replace worn or damaged parts for
safety.
 Ensure replacement parts fitted are
Bosch-approved.
 Do not operate the machine with-
out the trimmer attachment fitted.
Electrical Safety
 Warning! Switch off, remove plug
from mains before adjusting,
cleaning or if cable is cut, damaged
or entangled.
Your machine is double insulated for
safety and requires no earth connec-
tion. The operating voltage is 230 V AC,
50 Hz (for non-EU countries 220 V,
240 V as applicable). Only use ap-
proved extension cables. Contact your
Bosch Service Centre for details.
For increased electrical safety use a Re-
sidual Current Device (RCD) with a trip-
ping current of not more than 30 mA.
Always check your RCD every time you
use it.
Bosch Power Tools