Ec Declaration Of Conformity; Service Centre - Nortec BRIHOME 70172 Manual De Instrucciones

SMART LED BULB
First you have to download the app Bri-home First you have to download the app Bri-home
from the App Store/Google Play, or by
scanning the below QR code:
1) Put the bulb in the lamp holder.
2) Connect the power.
3) Turn on and off the bulb repeatedly until
the bulb blinks rapidly several times.
(Normally after turning on and off for
3 or 4 times, the bulb will blink if you
wait for some seconds, then it enters the
networking mode).
4) Ensure your phone is connected to wi�
and then open the "bri-home" App.
5) Create an account and login. (if you want
to use "google home" to control your
device, then you must register using a
phone number and not your email).
6) Setup a home name, family location and
choose/add rooms which are equipped
with smart devices.
7) Click "add device" or "+".
8) Choose "Lighting devices" next to the
bulb picture.
9) Click "Con� rm light blinks rapidly" at the
bottom of the screen
10) Enter wi� password and click "con� rm".
Then wait for connecting.
11) After connecting you can modify the
device name and select its location in
your house, then click "done".
10
12) Now you can set up, control, and
con� gure your WiFi bulb using the app.
You can share the bulb device with
your friends, create groups to control
multiple bulbs at the same time, control
the device with Amazon Alexa & Google
Home, and much more (by entering the
device and pressing "..." in the upper
right corner).
Important:
There may be regular updates altering the
interface and functions of the app. You will
be informed on the app about any new
updates.

EC Declaration of Conformity

http://imagebank.schou.com/MediaLibrary?
search=70172_DOC

Service centre

Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• www.schou.com