Distance Mode - Digi Sport Instruments DW-2026 Modo De Empleo

www.digisportinstruments.com
INSTRUCTION MANUAL
STOPWATCH DW1A
FEATURES:
- PC105M2, E18M2 with STEP and
DISTANCE functions
- Large LCD digits for easy reading
OPERATION INSTRUCTIONS:
STEP MODE:
When C is on the C2 position, the
indicator will be on the STEP
position. In this mode, the display
shows the number of steps moved.
Depressing A for 1 sec resets the
display to zero.

DISTANCE MODE:

When C is moved to the C4
position, the pedometer enters
DISTANCE MODE as shown in
Fig., which shows the distance
travelled corresponding to the
number of steps moved. Press B in
this mode changes the display to
the setting of the stride of the step.
Press B once advances the strides
by 1 or press and hold B will
advance strides at a rate of 4 Hz.
The range of the stride is 30 to
150cm. The display will return to
display of distance if B is not press
after 4 seconds.
BATTERY REPLACEMENT:
When the display becomes dim or
faded out, battery replacement is
necessary.
1. Remove the 3 screws at the back
of the unit
2. Remove the battery in the
direction
3. Replace the old battery with a
flesh Lithium battery (CR2025 or
equivalent).
4. Reinstall the screws at the back.
REMARK: The user should try
hooking the pedometer on Different
positions on the waist to attain the
most accurate measurement.
THE WARRANTY
DOES NOT COVER THE
BATTERY.