Scope Of Supply; Warning Information - Weller WFE 10 Instrucciones Para El Montaje

5 25 125 99 FE-Accessory for LR-21, LR-82, TCP-S
5 29 107 99 MLR-21 FE Micro soldering pencil with fume extraction device, 25W
5 13 125 99 FE-Accessory for DS-22, DS-80
5 15 030 99 Holder AK-20 for soldering-pencil with FE-Accessory
5 36 315 99 Breather Tube DN100
5 36 353 99 Bow 90° DN100 with socket
5 36 316 99 Suction hose NW44
5 36 317 99 Stretch nozzle flat
5 36 318 99 Stretch nozzle round
5 36 319 99 Double socket DN40
5 36 320 99 Bow 45° DN40
5 36 321 99 Branch Piece 2 x 45° DN40
5 36 322 99 Bow 90° DN40
5 36 323 99 Tube DN40 (2m)
5 36 324 99 End cap DN40
5 36 326 99 Extension hose DN17 (5m)
5 36 329 99 Pipe clamp DN40
5 36 344 99 Branch piece 2 x 90° DN40
5 36 338 99 Hose connector for single hose
5 36 343 99 Hose connector for extension hose DN17
5 87 351 42 Screw-in nipple DN17G3/8"
5 87 351 44 Nut G3/8"
5 36 345 99 Clamp holder for extraction arm
5 36 347 99 Extraction arm for bench assembly
5 36 348 99 Extraction arm for bench assembly, ESD-safe
5 36 349 99 Shade, pe-transparent, 256 x 248mm
5 36 350 99 Shade, pe-transparent, 385mm ø
5 36 351 99 Extraction nozzle, 50mm ø 230mm
5 36 352 99 Locking clip for FE-iron
5 36 414 00 Flex tube NW44 per meter
5 36 415 00 End cap NW44

6. Scope of supply

WELLER WFE 10 for direct connection with 5 WELLER FE soldering bits, equipped with:
1 expanded metal condensation filter
1 fine particulate air filter EU 5
1 Class S submicron particulate air filter in accordance with DIN 24 184
WFE10 22
PK Elektronik Vertriebs GmbH, Ellmendinger Str. 23, 76227 Karlsruhe
Tel.: 0721-43337, Fax: 0721-491292, vertrieb@pkelektronik.com, www.pkelektronik.com
1 wide band gas filter - 50% activated carbon, 50% Purafil for the extraction of soldering
fumes.
Illustration: wiring diagram - see page 52

7. Warning information

1. Keep your working area tidy.
Untidiness in the working area can result in accidents.
2. Take account of environmental influences.
Do not expose the power tool to rain. Do not use power tools in damp or wet
environments. Ensure that lighting is good. Do not use the power tool near flammable
liquids or gases.
3. Protect yourself against electric shock.
Avoid touching parts of the body with earthed components, e.g. pipes or heating
elements.
4. Keep children away.
Do not let other people touch the power tool or the cable. Keep other people away from
your working area.
5. Store the power tool safely.
Power tools which are not in use should be stored in a dry and sealed-off location,
outside the reach of children.
6. Do not overload the power tool.
You will work better and more safely within the stated power range.
7. Use the correct power tool.
Do not use machines which have insufficient power for heavy-duty tasks. Do not use
the power tool for purposes for which it is not designed.
8. Wear suitable working clothes.
Do not wear any wide clothing or jewellery; you could be trapped by movable parts.
Wear appropriate protective clothing to guard against burns. There is a risk of burning
by liquid solder.
19.07.2002, 8:02 Uhr
22