Set Up The Network Storage Link - Cisco Systems LINKSYS NSLU2 Guia De Inicio Rapido

2

Set up the Network Storage Link

A
Insert the Setup Wizard CD-
ROM into your PC's CD-ROM
drive. The Setup Wizard
should run automatically,
and the Main Menu screen
should appear. If it does
not, click Start and then Run.
In the field provided, enter
D:\SetupUtility.exe (if "D" is
the letter of your CD-ROM
drive).
B
Click the Setup button.
C
The Setup Wizard will
automatically search for
any Network Storage Link
that is currently on your
network or attached to your
PC. If it fails to detect the
Network Storage Link or if an
Network Storage Link has
been installed since the
Setup Wizard's last search,
click Search Again to
locate the Network Storage
Link.
Select the Network Storage
Link that you want to set up.
Then click the Yes button to
change any of the Network
Storage Link's settings.
D
You will be asked for your
password. For security
purposes, enter the current
password for the Network
Storage Link. The default is
admin. Click OK.
A
C
D
5