Explanation Of Symbols; Electrical Performance Parameters - Furrion net-zero FSFP10MW-BL Manual De Instrucciones

Explanation of Symbols

This manual has safety information and instructions to help you eliminate or reduce the risk of
accidents and injuries. Always respect all safety warnings identified with these symbols. A signal
word will identify safety messages and property damage messages, and will indicate the degree
or level of hazard seriousness.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate personal injury, or property damage.
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Electrical Performance Parameters

Furrion solar modules are made of monocrystalline solar cells in series with high efficiency, high
transmission rate, low iron tempered glass, anti-aging EVA, high flame resistant TPT laminate,
and anodized aluminium alloy frames. They are designed for easy installation, extended
longevity, and resistance to damage incurred by high wind or hail.
Value Parameters
Max Power (Pmax)
Operating Voltage (Vmp)
Operating Current (Imp)
Open-Circuit Voltage (Voc)
Short-Circuit Current (Isc)
Maximum System Voltage
Output Tolerance
Max Series Fuse Rating
Cell Efficiency
Temperature Coefficient of Voc
Temperature Coefficient of Isc
Temperature Coefficient of Pmax
Operating Temperature
NOTE: All technical data at standard test condition (E=1000W/m² TC=25°C AM=1.5)
WARNING
CAUTION
DANGER
FSFP10MW-BL
100W
19.3 V
5.18 A
23.8 V
5.59 A
600V
±3%
10 A
21.37%
-0.32 %/ºC
+0.05 %/ºC
-0.41 %/ºC
-40ºF to +185ºF
(-40ºC to +85ºC)
FSFP16MW-BL
165W
18.72 V
8.82 A
23.12 V
9.49 A
600V
±3%
15 A
19.22%
-0.32 %/ºC
+0.05 %/ºC
-0.41 %/ºC
-40ºF to +185ºF
(-40ºC to +85ºC)
FSFP19MW-BL
190W
19.08 V
9.77 A
24.06 V
9.96 A
600V
±3%
15 A
22.3%
-0.28 %/ºC
+0.04 %/ºC
-0.38 %/ºC
-40ºF to +185ºF
(-40ºC to +85ºC)
2