Features; Operation Instructions; Temperature Selection; Interior Light - Danby Designer DCR031B1BSLDD Guía De Utilización Y Cuidado Para El Propietario

Ocultar thumbs Ver también para DCR031B1BSLDD:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1
Freezer compartement
2
Temperature control (with integrat-
ed interior light assembly)
3
Wire shelf
4
Crisper with glass cover
5
Leveling legs
6
Freezer door bin
7
Refrigerator door bin
CANSTOR TM beverage can dis-
8
penser
9
2-Liter bottle bin.
TEMPERATURE SELECTION
The first time you turn the unit on, set the temperature control to "7," the coolest
setting.
The range of temperature controls are from position "0," or NO COOLING to "7",
the coldest. After 24 to 48 hours, adjust the temperature control to the setting
that best suits your needs. The setting of "4" should be correct for home or office
refrigerator use.
NOTE:
If the unit is unplugged, has lost power, or has been turned off, you must wait 3
to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the refrigerator will not start.
Turning the refrigerator temperature control to the "0" position stops the cooling cycle but does not shut off the power to the
unit.
INTERIOR LIGHT
When you open the door the light will be ON automatically. When you close the door the light will turn OFF automatically.

FEATURES

1
2
3
4
5
OPERATING INSTRUCTIONS
4
6
7
8
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dcr031b1wdd

Tabla de contenido