Publicidad
E
NGLISH
B
Y MANUAL SEARCH
1
- Turn on the device that you wish
to operate.
3
- Keep the SET key pressed down
until the indicator light comes on.
5
- Press steadily on the Up key until
the device turns off.
- Each time that you press, a new
code is tested and a turn-off signal
is sent to your device. Be patient,
you may have to try more than one
hundred times.
- When the device turns off, turn it on
again and try the other remote
control operating functions (volume,
channels, etc, except Up, Down and
OK). If all the functions do not work
correctly, press again on Up until
your device turns off.
4
(
IF YOUR EQUIPMENT IS NOT ON THE CODE LIST
2
- Press several times on the Select
key until the LED indicating the
device that you wish to operate
lights up.
4
- Press on the Mute key.
The indicator light flashes once.
- Be sure to keep the remote control
pointing towards the device.
6
- If you are satisfied, press on the OK
key to validate the programming.
7
- Repeat the procedure to program
the other devices.
)
Publicidad
