AFA AFLZ02 El Manual Del Propietario página 9

13
10
T-6
19
Use Level T-6 (Not included) to adjust
the bottom of diverter in a 90 degree
vertical position.Tighten set screw
on the side of Diverter Valve (19) with
3/32" Allen Wrench T-3 (Included).
16
16
Remove
the
protective
cap
from Rain
Shower Head (15). With an Adjustable
Wrench (T-13) and a rag, tighten Rain
Shower Head onto Adjustable Shower
Arm (16).
14
T-3
3/32"
Press rmly to the wall. Allow minimum
of 4 hours for proper adhesion.
17
13
15
12
Remove the plastic protective cap
from Bottom Diverter Joint (11), and
connect the end of the Hand Shower
Hose (12). Tighten with Adjustable
Wrench (T-13).
11
T-13
9
15
16
Loosen the wing nut of the Adjustable
Shower Arm (16) and adjust the gear
joint to a suitable height and tighten
the Shower Arm Adjuster (17) wing nut.
18
18
6
Place the Hand Shower (18) into Hand
Shower Holder (6). Press the button
and adjust holder to a convenient
height.
17