Let's Get Started - Power Wheels FMD26 Guia De Inicio Rapido

LET'S GET STARTED

Battery must be upright
while charging.
• Plug the charger into a wall outlet. The charger LED is blue,
indicating that there's power.
Note: If the LED is not blue, you may not have power to the outlet.
If there is a switch that controls power to the outlet, make sure
it's ON.
• Plug the charger into battery. The charger LED should change to
red or green. If it remains blue, make sure the charger is firmly
plugged into the battery.
• Allow 6 hours for a full charge. The charger LED should be green.
Remove the charger connector from the battery and then unplug
the charger from the wall outlet.
• The battery is now ready to be installed in your vehicle. Please
refer to the vehicle Owner's Manual for instructions to install the
battery in your vehicle.
4
Do not plug the
charger into
a ceiling outlet.